JETRAY / Battery engineering & sourcingShenzhen, Chinasale1@jetray.cn ↗
JETRAYRobotics & AGV Battery ProjectsBlog
HomeApplications
APPLICATION PLANNING

Build around the operating conditions.

Start with the equipment, its environment and its work cycle. Use the following requirements to prepare a focused engineering discussion.

Application / 01

Mobile robot platforms

Measure acceleration, cruise, payload and standby demand across a representative route.

What to define

  • Capture the load during start-up, acceleration, turns, payload handling and idle periods.
  • The acceptable voltage window and behavior during start-up or a low-battery event.
  • The installation drawing, charging interface and expected environment.
  • Acceptance criteria for the complete equipment, including its battery interface.
Discuss this application
Application / 02

Autonomous equipment

Review operating time, docking behavior and low-battery transitions together.

What to define

  • Confirm voltage limits, BMS signals and the system response to protection events.
  • The acceptable voltage window and behavior during start-up or a low-battery event.
  • The installation drawing, charging interface and expected environment.
  • Acceptance criteria for the complete equipment, including its battery interface.
Discuss this application
Application / 03

Industrial automation projects

Define vibration, mounting, service access and communication needs in the battery specification.

What to define

  • Evaluate charging opportunity, connector wear, temperature monitoring and the return-to-service criteria.
  • The acceptable voltage window and behavior during start-up or a low-battery event.
  • The installation drawing, charging interface and expected environment.
  • Acceptance criteria for the complete equipment, including its battery interface.
Discuss this application
Catalogue references support a project discussion. They do not establish approval for a medical device, vehicle, robot or complete energy installation.
APPLICATION CASE FILES / MOTION-DRIVEN POWER SYSTEMS

See the decisions behind an application.

Explore practical planning briefs for robotics & agv battery projects: the operating challenge, integration approach and sample-review questions.

These are application planning examples, not documented customer deployments. Factory photographs are from the Jetray corporate website and do not identify a customer project.

Application decision map

Connect the use case to the battery requirements.

A useful application review starts with what the equipment does, how it is powered and how it will be evaluated.

Application focusRequirement to definePractical review step
Mobile robot platformsMeasure acceleration, cruise, payload and standby demand across a representative route.Capture the load during start-up, acceleration, turns, payload handling and idle periods.
Autonomous equipmentReview operating time, docking behavior and low-battery transitions together.Confirm voltage limits, BMS signals and the system response to protection events.
Industrial automation projectsDefine vibration, mounting, service access and communication needs in the battery specification.Evaluate charging opportunity, connector wear, temperature monitoring and the return-to-service criteria.

Bring a representative duty cycle.

Route-based duty cycle, acceleration peaks and idle demand. Record normal operation, idle periods and the conditions that create the highest demand.

Agree the equipment test.

Define the sample configuration, setup, pass criteria and responsible reviewers before comparing results.

A useful conversation starts with a specification

Tell us what your equipment needs.

Share the load, dimensions and intended use. Ask for a current model specification and a project review.

Discuss your project

Product comparison